Wireless Studio Flash RT-16 16 Channel Trigger+Receiver
Features:
- This wireless trigger is control discreteness for camera to trigger hot shoe flashgun synchronously
- Easy installation, low power consumption
- No any damage to camera
- High-speed and synchronous for 1/200 second
- Max. working distance: 30M (open area, without interference)
- 16 channels to avoid interference
- The receiver has an on/off switch, and an LED to indicate triggering.
- New design: Channel Selector outside the transmitter and the receiver
Specifications:
- Wireless Flash Trigger;
- 16 channels selectable
- Power Input of Transmitter: 23A 12V battery (included)
- Power Input of Receiver: 2 AAA batteries
- Long lifetime of trigger battery, one year or over 20,000 continuously triggers
- Plug size of receiver: 3.5mm
- Adapter size for receiver plug: 3.5mm --> 6.35mm
- PC sync cable included
- Radio working frequency: 433MHz
?
How to use:
- Make sure the channel selector of both transmitter and receiver at same position
- Insert the receiver's trigger output plug into your flash's jack
- Press the test button on your transmitter. The studio light should now flash
- Insert the transmitter's hot shoe socket into your camera's hot shoe
jack
(if your camera does not have a hot shoe use a PC sync cord and insert into the socket) - You should now be ready to start shooting
(you can use the 3.5mm sync cable for cameras without hotshoe or hotshoe is engaged).
Package Contents:
没有评论:
发表评论