RF-603 Wireless Flash Trigger Shutter
Release Remote Control For Canon
Description:RF-603 using a global free FSK 2.4GHz wireless channel which can be suitable in many country. RF-603 with FSK, can guarantee speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m.
RF-603 wireless flash trigger system consist two or more similar transceivers, automatically change transmit and receive state, namely two or more transceivers can be used at the same time to control cameras or flash lights.
In support of flash waking up and triggering synchronically , with PC sync cable (optional) can be triggering studio lights sync, with specially camera shutter connecting cable (optional) can be used as wired / wireless shutter release remote control. Even installed on the flash can also be used as a shutter release remote and flash trigger sync.
When special transceiver for Canon or Nikon were used, the flash sync speed reach to 1/320s(some of models may reach to 1/250s only or less, difference models of flash and camera using may achieved difference flash sync speed).
Features:
1. Works as a wireless shutter release control
- Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported
- Depending on the camera model a special shutter release cable is included in the package
2. Transceiver based system - works
as a wireless flash trigger and receiver
- Each RF-603 is designed to work as trigger and as
receiver. The unit automatically detects the mode it should work in. You have
the full flexibility out of your gear.
- As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver.
- Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
- Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode.
- As a trigger the RF-603 can be placed in the cameras hot
shoe or if you wish be connected with the camera by a PC Sync cable. In the
latter case you are free to mount an additional flash top-camera.
- One transceiver can trigger more than 1 flash at the same time. You would have to buy additional transceivers for 2 or more flashes, since you need one transceiver as a trigger and one or more transceivers as receivers.
3. Wireless
trigger studio flash
- Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Specification:
Type
|
FSK 2.4GHz wireless remote
system
|
Transmitter
Distance
|
100m
|
Channel
|
15 different channels and all
channels
|
Release
|
Half-way press, full-way
press
|
Transmitter
Port
|
PC Sync
|
Receiver
Port
|
PC Sync, 2.5mm for shutter
release
|
Time of shooting
|
Up to 20000
times
|
Receiver stand-by
time
|
Up to 45 hours (using AAA
batteries)
|
Dimensions
|
12.5x4x8CM
|
Weight
|
5.2
oz
|
Compatible cameras:
- Canon: 20D,30D,40D,50D,5D,1D Mark II,1D Mark III,1Ds Mark II,1Ds Mark III, 1D Mark IV, 5D Mark II,7D
Package Contents:
- 2 x Transceivers
- 1 x Shutter release cable
没有评论:
发表评论